If you have never tried installing a tri-clamp fitting, you may wonder how they work. The answer is relatively simple. Tri-clamps secure connections between various components. Whether the fittings are used for food or pharmaceutical products, tri-clamps should be installed with precision and care. Proper alignment is essential to avoid any problems with securing your connections. If there are any alignment problems, the clamps will not hold the components in place and will only get worse.
When buying a Tri-Clamp, remember that the size of the fitting is determined by the outside diameter of the tubing. For example, a 1.5″ Sanitary Spool will use a 1.5″ Tri-clamp. Make sure you buy a fitting with the correct size, or you could end up with a leaky connection. You can choose from different sizes by referring to a chart or contacting the company for more details. Also, remember to use the right gasket to ensure leak free operations and sanitary conditions.
When purchasing a tri-clamp, you should always opt for a high-quality clamp from Glacier Tanks. A higher quality clamp will be more resistant to corrosion and other factors that can negatively affect its performance. In addition to reducing maintenance costs, higher-quality clamps will be easier to install and free up your maintenance team. However, if you plan to use it frequently, make sure you invest in high-quality clamps. If you don’t want to spend time and money on a poorly installed tri-clamp, you should buy a clamp that is pre-stressed.
When installing tri clamps and sanitary fittings, always keep in mind that the connections can be reused. However, do not forget that the gaskets can break down or be damaged due to excessive use. You can re-torque the connections with a torque wrench or half-turn. Make sure to tighten them properly after the first use, especially if they are used in high-pressure steam lines. If the gasket is too tight or too loose, this could lead to bacterial growth and even corrosion of the fitting.
Tri-clamps were originally made of three separate segments. Their shape is designed to enable easy disassembly. Additionally, these fittings are interchangeable and can be used on different diameters of pipes. However, the size of the pipe is the only difference between one-inch and a 1.5-inch clamp. Purchasing a pump with a Tri-clamp design can be tricky, so take your time and measure your pipe before you purchase one.
Differentiated fittings require different gaskets. The smaller OD tubes can be mistaken for larger ones. For example, the same gasket will fit the 3/4-inch tube but not the one with a 1.5-inch OD. In this case, you should use a different gasket size. If you need more flexibility, you should use a tri-clamp. It is a versatile tool for many industrial applications.
